Uhu Plus Schnellfest quick set dual-component adhesive, 1 tube of binder, 1 tube of hardener, 30 ml

Product information "Uhu Plus Schnellfest quick set dual-component adhesive, 1 tube of binder, 1 tube of hardener, 30 ml"

Use UHU plus 2-component adhesives when the joint must withstand extreme loads. This crystal clear, solvent-free and fast curing epoxy adhesive is ideal for the strong and invisible repair of many different materials.

Field of application

Suitable for pottery, porcelain, glass, leather, wood, stone, metal, ceramics
Not suitable for polyethylene, polypropylene, PTFE and silicone rubber.

Usage

Degrease parts to be bonded with denatured alcohol. Roughen smooth surfaces with sandpaper.

Press out an equal amount of both components onto the enclosed mixing tray. Mix these two equal parts well with the spatula until a mixture is obtained with a homogeneous colour.

Apply the mixture, which at room temperature (+20°C) remains toolable for about 5 minutes, as a thin layer on one of the two materials. Assemble the material and keep it in place for 20 minutes.

Scope of delivery

Tube of binder, epoxy resin, 15 ml
Tube of hardener, polymer, 15 ml
Mixing tub
Synthetic spatula

Features

Mixing ratio: 1:1 (by volume)
Drying/curing time approx. 5 minutes
Load bearing after approx. 30 minutes
Final bonding strength after approx. 12 hours
Tensile strength: approx. 1000 N/cm²
UV and chemical resistance: Very good
Moisture resistance: Good
Temperature resistant between -40°C and +100°C

Color: Transparent
Contents : 30 ml
Fixture Time: 20 min
Operating temperature: +5 to +100 °C
Product area: Adhesives, lubricants & chemicals
Viscosity: Medium
Weight (kg): 0.055